Application: | Bus Bar Casting Resin |
---|---|
Type: | Liquid |
Chemistry: | Organic Insulation |
Material: | Resin |
Thermal Rating: | F 155 |
Maximum Voltage: | <10KV |
Cast Resin / Waterproof Cast Resin for Bus Duct
Basic Info.
Product Description
Cast Resin / Waterproof Cast Resin for Bus Duct
TY-7020A 300 PBW
TY-7020B 100 PBW
Application
TY-7020A/B is Eco-friendly Series Room-temperature Curing Epoxy Resin with good insulation performance and mechanical strength, strong chemical stability, fast heat dissipation, good process performance and excellent surface gloss. It is mainly used for casting and filling of Bus Duct.
TY-7020A Main Agent TY-7020A |
TY-7020B Hardener TY-7020B |
|
Color | The color is yellowish | The color is yellow |
Viscosity 25ºC(mpa.s) | 3000-4000 | 500-800 |
Density 40ºC(g/cm3) | 1.05-1.15 | 1.10-1.20 |
Packing Specification | 20KG / 200KG | 20KG / 200KG |
Mixing Ratio:
A:B=300:100:(900-1000) filer
Using Time: 25ºC X 60-90 minutes(The mixture is 100g)
Curing Condition: The surface will be dry at 25ºC for 4 hours, 24 hours can be fully cured.
Operating Process
1. Cleaning treatment material
Using electronic scales to add TY-7020A/B according to 3:1 mixing ratio. Mix and stir A and B with stirring motor, the stirring time is 1-2 minutes, After A and B complete
the mixing, add the filler with a certain proportion, Mix thoroughly , then start the casting.
Properties after curing
Compressive Strength | MPa | 20-23 |
Bending Strength | MPa | 8-10 |
Tensile Strength | MPa | 16-18 |
Hardness | Shored | 78-85 |
Volume Resistance 25ºC | (/cm) | 1014 |
Surface Resistance 25ºC | (/cm) | 1013 |
Operation Protection Measures
Workplace Safty Protective Clothing | Need |
Gloves Respirator/Dust mask |
Essential when skin contact likely, recommend Recommend |
Skin protection before starting work | Apply barrier cream to exposed skin |
After washing Treatment of contaminated skin |
Apply barrier or nourishing cream Dab off with absorbent paper, wash with warm water and alkali-free soap, then dry with disposable towels. Do not use solvents. |
Workshop Cleaning Requirements | Cover workbenches, chair with light colored papers. Use disposable breakers, etc. |
Disposal of Spillage | Soak up with sawdust or cotton wool, and place in plastic woven baskets. |
First Aid
Contamination of the eyes by resin, hardener or casting mix should be treated immediately by flushing with clean, running water for 10 to 15 minutes. A physician should be consulted.
Material smeared or splashed on the skin should be dabbed off, then wash the contaminated sites with running water(see above). A physician should be consulted in the event of severe irritation or burns. Contaminated clothing should be changed immediately. In any case of doubt, pls call for medical assistance.
Product consultation
Online search
Try to provide customers with perfect products and services.
Jiangxi Tengde Industrial Co., Ltd.
Tel:086-794-7888226
Fax:086-794-7881095
mobile phone:18679404688
E-mail:2061631242@qq.com
Address: No. 222 Anshi Avenue, Fuzhou high tech Industrial Park, Jiangxi Province
Official official account

Copyright © Jiangxi Tengde Industrial Co., Ltd. All Rights Reserved 赣ICP备15002964号 Powered by www.300.cn SEO